Rancang Bangun Prototype Pemotong Rumput Berbasis Arduino Uno Dengan Kendali Smarphone Android

Authors

  • Tria Novita Politeknik Negeri Ketapang
  • Yudi Chandra Politeknik Negeri Ketapang
  • Fachrul Rozie Politeknik Negeri Ketapang
https://doi.org/10.58466/entries.v3i1.1601

Abstract

Maintaining a clean environment has become an individual responsibility, but maintaining it requires more time, energy and costs. In this research, the aim is to design a prototype grass cutter based on Arduino Uno with remote control using an Android smartphone with a Bluetooth connection to avoid the risk of accidents that could occur. The process of designing a grass cutter prototype based on an Arduino Uno with Android smartphone control is problem identification, data collection, tool design, tool making, testing, discussion and conclusions. In the process of designing a grass cutter prototype based on an Arduino Uno with Android smartphone control, selecting the required components, then calculating the required components. After the type and specifications of the components are known, the next step is to calculate the manufacture of a prototype grass cutter based on an Arduino Uno to find out the recommended Cost Budget (RAB) for a prototype grass cutter based on an Arduino Uno with Android smartphone control. The test results show that this system can operate well, is able to detect and provide effective grass cutting performance and the Bluetooth module used as a controller connection functions with a control distance of 1 meter to 20 meters. The height of the grass that can be cut by the prototype grass cutter is 5 cm to 15 cm. The test results show that battery consumption in 1 minute when the grass cutter prototype is operating is 0.8 Volts, then after using it for 5 minutes there is a reduction in battery voltage from 15.05 Volts to 11.05 Volts, meaning that after 5 minutes of use there is a current consumption of 4 Volts and the system will stop operating when the voltage drops below 12 V.   Keywords: Prototype, Grass Cutter, Arduino Uno, Android Smartphone, Bluetooth HC-06.

References

Bellarmino Wira Permana, (2021) membuat alat dengan judul rancang bangun robot pemotong rumput berbasis arduino uno menggunakan smarphone android.

Dedi Irawan dan Endah Fitriani, (2021) membuat alat dengan judul rancang robot pemotong rumput berbasis arduino uno dengan sistem kendali aplikasi blynk.

M Khoironi Mualif Dwiyana, (2020) membuat alat dengan judul rancang bangun prototype alat pemotong rumput dengan sistem pengendali menggunakan android.

Christyan August Pambudi, (2017) membuat alat dengan judul dengan model robot pemotong rumput berbasis mikrokontroler

Azis Isrofi, Shoffin Nhwa Utama, dan Oddy Virgantara Putra, (2021) membuat alat yang berjudul rancang bangun robot pemotong rumput otomatis menggunakan wireless kontroler modul ESP32-CAM berbasis Internet of Things (IoT)

Yusman, Widdha Mellyssa, Salahuddin, Kharazzi Mukhlisin, dan Said Mualla, (2023) membuat alat dengan judul rancang bangun robot pemotong rumput secara otomatis dengan kontrol smartphone android berbasis arduino uno.

Published

2024-01-01

How to Cite

Novita, T., Chandra, Y., & Rozie, F. (2024). Rancang Bangun Prototype Pemotong Rumput Berbasis Arduino Uno Dengan Kendali Smarphone Android. Electrical Network Systems and Sources, 3(1), 43-47. https://doi.org/10.58466/entries.v3i1.1601

Most read articles by the same author(s)

1 2 > >>