Perancangan Mesin Pencacah Pelepah Kelapa Sawit
DOI:
https://doi.org/10.58466/t1x19z04Kata Kunci:
Design; palm fronds; shredding machineAbstrak
The palm frond chopper machine is a machine used to simplify processing. The working principle of this machine is a frictional force method, where the electric motor transmits rotation to the shaft, pulley, v-belt and bearing. On the shaft inside the cover contains a blade. The results of the tool specifications that have been designed using AutoCAD 2007 are as follows: Frame dimensions 900 mm × 820 mm × 500 mm, top cover diameter Ø430 mm × 360 mm, bottom cover dimensions 730 mm × 360 mm × 390 mm × 45°, blade length 250 mm × 100 mm × 8 mm. Using a 5 HP gasoline motor, using a single transmission system with 2 1: 2 pulleys, 2 side-by-side v-belts, one shaft and two sitting bearings.
Unduhan
Referensi
[1] BPS Rokan Hulu. 2018. Rokan Hulu dalam Angka. BPS Rokan Hulu. Rokan Hulu.
[2] Hasrin, “RANCANG BANGUN MESIN PEMARUT PELEPAH KELAPA SAWIT UNTUK PAKAN TERNAK,” 2013, vol. 27, pp. 38–44.
[3] Intara, Y. I. (2012). Studi sifat fisik dan mekanik parenkhim pelepah daun kelapa sawit untuk pemanfaatan sebagai bahan anyaman. Agrointek: Jurnal Teknologi Industri Pertanian, 6(1), 36–44.
[4] R. Dewi, “Rancang Bangun Mesin Pencacah Rumput Ternak Dengan Menggunakan Pisau Strip,” Mataram, 2021.
[5] Kaharudin and B. D. Hariprihadi, “Rancang Bangun Mesin Pencacah Pakan Ternak Kapasitas 50 kg/jam,” Sigmat – J. Ilm. Tek. Mesin, vol. 01, no. 02, pp. 1–8, 2021.
[6] Kurnianto Rahmat Rifko;Agung Wibowo; Tri Prakosa, “Penerapan Metoda Design for Manufacture and Assembly pada Handle Transformer Hand Bike,” 2015, no. Snttm Xiv, pp. 7–8.
[7] Marsudi, M., & Syahrillah, G. R. F. (2018). Perencanaan Sistem Mekanikal Elektrikal dan Plumbing (MEP) pada Gedung Bertingkat. Al Jazari: Jurnal Ilmiah Teknik Mesin, 3(1).
[8] ROBIYANSYAH, “PERANCANGAN MESIN PENCACAH PELEPAH SAWIT UNTUK PAKAN TERNAK SAPI,” J. Mhs. Tek. MEsin, 2015.
[9] R. L, Suhariyanto, Widiyono, and Mursid, “Analisa Gaya dan Daya Mesin Pencacah Rumput Gajah Berkapasitas 1350 kg/jam,” J. Energi Dan Manufaktur, vol. 7, no. 2, pp. 163–172, 2015.
[10] Sularso and K. Suga, Dasar Perencanaan dan Pemilihan Elemen Mesin, 12th ed. Jakarta: Pradnya Paramita, 2008.
