Design and Development of a Water Wave Ripple Generator Prototype
Performance Testing of a Water Wave Generator Prototype
Keywords:
Servo motor, ultrasonic sensor, Arduino Uno, aquarium container, push lever.Abstract
This research aims to develop a prototype of a laboratory-scale wave generator to explore the potential of river wave energy, which has mostly been focused on marine energy due to its significant potential. The device consists of a container measuring 100x22x30 cm, using a servo motor to generate water ripples and an ultrasonic sensor to detect ripple height. Two propulsion methods are employed: simultaneous and alternating, with more varied ripple patterns observed in the alternating method. Changes in the servo motor’s angle produce three thrust levels with different wave heights: slow (1-2 cm), moderate (2.5-3 cm), and strong (3 cm). The findings highlight the renewable energy potential of river wave energy, which can be harnessed sustainably, reducing carbon emissions, dependency on fossil fuels, while enhancing energy security and job creation.References
Agustina, S., Hamdadi, A., Yuniarti, D., Simatupang, D. T., Fortuna, A. D., & Wahab, H. (2022). Perancangan Prototipe Pembangkit Listrik Tenaga Gelombang Sungai Menggunakan Gerak Translasi Magnet Permanen. Jurnal Asiimetrik: Jurnal Ilmiah Rekayasa & Inovasi, 4, 133–142. https://doi.org/10.35814/asiimetrik.v4i1.3349
Briyan Dimas Pangestu, (2021). Rancang Bangun Perangkat Keras Sistem Monitoring Suhu dan Kelembapan Otomatis Pada kandang Anak Ayam Usia 0 – 21 Hari. Tugas Akhir Program Studi D3 Teknik Komputer, Politeknik Harapan Bersama.
Eni. (1967). Angewandte Chemie International Edition, 6(11), 951–952., Mi, 5–24. Kasmawati,Indriyanti, Latif.F, (2022). "Teknik Hidro". https://journal.unismuh.ac.id/index.php/hidro/article/view/4240/0 , diakses tanggal 16 desember 2023.
Kevin Dean Willem, (2022). Analisis Sensor Ultrasonik Pada Benda Padat dan Cair di Berbagai Waktu. Skripsi. Fakultas Teknologi Dan Informatika, Universitas Dinamika.
Mahendra, G., & Sukardi, S. (2021). Rancang Bangun Kontrol Pintu Air Dan Monitoring Ketinggian Air Sungai Berbasis Internet of Things (IoT). JTEIN: Jurnal
Teknik Elektro Indonesia, 2(1), 98–106. https://doi.org/10.24036/jtein.v2i1.134.
Nurhabibah Naibaho1, R. (2019). Rancang Bangun Konversi Gelombang Air Laut Menjadi Energi Listrik Di Pantai Anyer. Jurnal Ilmiah Elektrokrisna, 7(3), 86–92.
Prasetyo, A, E. 2022 Cara Interface Arduino Uno dengan Hardware I2C LCD 16x2 https://www.arduinoindonesia.id/2017/02/cara-interface-arduino-uno-dengan.html, diakses tanggal 14 juli 2023
Prasetyo, A, E. 2022 Pengertian dan Prinsip Kerja Sensor Ultrasonic. https://www.andalanelektro.id/2018/09/cara-kerja-dan-karakteristik-sensor-ultrasonic-hcsr04.html, diakses tanggal 14 juli 2023.
Pristiandaru, L, D. Menegnal Energi Ombak Laut yang Potensial Kompas.com:inspirasi-energi-mengenal-energi-ombak-laut-yang-potensial.
Roghib m., (2018). Menara Ilmu Mikrokontroller, Universitas Gadjah Mada.https://mikrokontroler.mipa.ugm.ac.id/2018/10/02/program-lcd-i2c/.
Simanjuntak, Henni, T. (2020). Desain dan pembuatan alat pendeteksi ketinggian air sungai berbasis arduino uno. Seminar Nasional Ilmu Terapan IV 2020, 1–6.
Ulinnuha L., Joko S. S., Perancangan Robot ARM Gripper Berbasis Arduino Uno Menggunakan Antar Muka Labview. Jurnal Barometer, Vol.3, No.2, Juli 2018. Program Studi Teknik Elektro, Fakultas Teknik, UniversitasaSingaperbangsaKarawang.https://journal.unsika.ac.id/indexphp/barometer/article/view/1395 .