Rancang Bangun Sistem Transfer Layout PCB Berbasis Arduino Uno R3
https://doi.org/10.58466/entries.v3i2.1638
Abstract
PCB layout transfer system is the process of transferring ink on paper to PCB board to produce component paths. The PCB layout transfer process is an important role in electronic circuit design. The PCB layout transfer process is usually used using an iron that takes a long time. This research is the manufacture of tools that aim to increase efficiency in the process of transferring PCB layout
ink transfer process from paper to PCB board which can be set transfer process time with the terms of time set by the user. The results of the PCB layout transfer system research use the Arduino UNO microcontroller , thermocouple temperature sensor, 20 x 4 LCD, DC Motor, L298N Motor Driver, MAX 6675 Driver, Heating Plate, Rotary
Encoder , and Relay Module 2 Channel. This system provides an effective semi-automatic solution in the PCB layout transfer process.
References
Adnyana, S. G. I., Mahardinata, A. M. I., Suhartono, & Dharmayati, I. C. (2022). Rancang Bangun Hot Plate Magnetic Stirrer Berbasis Mikrokontroler Atmega8. Jurnal Teknik Elektro Dan Komputasi (ELKOM), 4(2), 1–3. http://repository.umy.ac.id/handle/123456789/16001
Barmawi, Azhar, & Kamal, M. (2023). Rancang Bangun Penggunaan Sensor Thermocouple Pada Alat Penyangrai Biji Coklat Secara Otomatis Berbasis Arduino Uno. Jurnal Tektro, 7(1), 2023.
Bawotong, V. T. (2015). Rancang Bangun Uninterruptible Power Supply Menggunakan Tampilan LCD Berbasis Mikrokontroler. E-Journal Teknik Elektro Dan Komputer, 1–7.
Darmawan, I. A. (2020). Faktor - Faktor Kegagalan Pemasangan Komponen Chip Pada Papan PCB Menggunakan Mesin Chip Mounter. Jurnal Untirta, 3(1), 397–403.
Evalina, N., Pasaribu, F. I., H, A. A., & Sary, A. (2022). Penggunaan Arduino Uno Untuk Mengatur Temperatur Pada Oven. RELE (Rekayasa Elektrikal Dan Energi) : Jurnal Teknik Elektro, 4(2), 122–128. https://doi.org/10.30596/rele.v4i2.9559
Khalid, M., Syukri, M., & Gapy, M. (2016). Tanemakizo. Pemanfaatan Energi Panas Sebagai Pembangkit Listrik Alternatif Berskala Kecil Dengan Menggunakan Termoelektrik, 1(3), 57–62.
Pradipta, A., Apatya, Y. B. A., & Krismastuti, H. (2022). Kendali Suhu Pada Mesin Hostia Baking Oven Menggunakan Sensor Thermocouple Tipe K Temperature Control on Hostia Baking Oven Machine Using Type K Thermocouple Sensor. Elektro Luceat, 8(1), 16–23.
Sonda, D., & Anwar, M. (2021). Perancangan dan Pembuatan Alat Pelarut PCB Secara Otomatis Menggunakan Sistem Kontrol Berbasis Mikrokontroler ATMEGA 32. Voteteknika (Vocational Teknik Elektronika Dan Informatika), 9(2), 1. https://doi.org/10.24036/voteteknika.v9i2.111325
Zahrotin, E. (2014). FABRIKASI DAN KARAKTERISASI SENSOR KAPASITIF UNTUK LEVEL AIR FABRICATION AND CHARACTERIZATION OF CAPACITIVE WATER LEVEL SENSOR.
This journal has been indexed by: 
