Perancangan Dan Pembuatan Alat Penekan Piston Rem Sepeda Motor
DOI:
https://doi.org/10.58466/g7vj6v87Abstract
Because many mechanics in general repair shops still press brake pistons using a ring spanner, which often causes the brake pistons to be scratched or broken, the purpose of this study is to assist mechanics in the brake pad installation process to avoid piston damage and to understand how the brake piston presser works.The methods used include literature review, field observation, design using AutoCAD software, and the manufacturing process, which consists of four main stages: material preparation (iron plate, bolts, nuts). After the tool is completed, testing is conducted to ensure its function and efficiency. The average time for the brake piston presser tool is 06.47 seconds, while the average time when using a ring spanner is 07.72 seconds. The test results can be seen from the efficiency of the brake piston presser tool made by the author
Downloads
References
Anhar, M. (2019). Pendinginan Pengelasan dengan Metode SMAW pada Kekerasan Baja Karbon ST37 dengan Media Serbuk Semen Abu-Abu pada Beban Rockwell 100 kgf. ROTASI, 21(3), 140. https://doi.org/10.14710/rotasi.21.3.140-146
Anhar, M., & Polonia, B. S. E. (2021). The Effect Of Addition Of Limestone Powder And Gypsum As Isolator Media On Low Carbon Steel SMAW Welding. Journal of Applied Engineering and Technological Science (JAETS), 2(2), 94–102. https://doi.org/10.37385/jaets.v2i2.223
Anhar, M., & Ruchiyat, A. (2020). Pendinginan Pengelasan menggunakan Metode SMAW pada Kekerasan Baja Karbon ST3 dengan Media Serbuk Semen Putih dan Beban Rockwell 100kgf. Jurnal Teknologi dan Rekayasa Manufaktur, 2(2), 99–108. https://doi.org/10.48182/jtrm.v2i2.66
Islam, T., & Rashed, H. M. (n.d.). Classification and Application of Plain Carbon Steels.
Lahtinen, T., Vilaça, P., Peura, P., & Mehtonen, S. (2019). MAG Welding Tests of Modern High Strength Steels with Minimum Yield Strength of 700 MPa.
WJ_2011_10.pdf.crdownload. (n.d.).
Na`am J., Harlan J., Madenda S., and Wibowo E. P. 2016. Identification of the Proximal Caries of Dental X-Ray Image with Multiple Morphology Gradient Method. International Journal on Advanced Science, Engineering and Information Technology (IJASEIT), 6(3), pp. 343-346. doi:10.18517/ijaseit.6.3.827.
Na`am J., 2017. Edge Detection on Objects of Medical Image with Enhancement multiple Morphological Gradient (EmMG) Method. 4th Proc. EECSI. 23-24 Sep. 2017. Yogyakarta: Indonesia. doi=10.1109/EECSI.2017.8239085
