DESIGN OF A 3 PHASE ELECTRICAL MONITORING SYSTEM BASED ON THE INTERNET OF THINGS (IOT)
![](/public/site/doi-logo.png)
Abstract
ABSTRACT
The electrical system is an important component in modern infrastructure, because almost all devices used in human activities today use electricity as a resource. To maintain the continuity of these activities, a system is needed that can monitor electrical conditions in real time in order to prevent bigger problems from occurring in the electrical system. This monitoring system uses the PZEM-004T to measure voltage, current, and frequency. NodeMCU ESP8266 to help display data such as, Voltage, Current, and Frequency on I2C and Blynk LCDs. I2C LCD to display Voltage, Current and Frequency. And Blynk to display Voltage, Current and Frequency. The results of the tests that have been carried out have an average error value of 0.0012% for voltage and 0.28% for current. Where the average error value in each test is below the tolerance value stated in the PZEM-004T sensor specifications, which is 0.5%.
Keywords: Monitoring, Voltage, Current, Frequency, Blynk.
References
Habibi, Fatoni Nur, Sabar Setiawidayat, and Moh Mukhsim. "Alat Monitoring Pemakaian Energi Listrik Berbasis Android Menggunakan Modul PZEM-004T." Prosiding Seminar Nasional Teknologi Elektro Terapan. Vol. 1. No. 01. 2017.
Kurniawan, Ady, Dikpride Despa, and M. Komarudin. "Monitoring besaran listrik dari jarak jauh pada jaringan listrik 3 fasa berbasis single board computer BCM2835." Jurnal Informatika dan Teknik Elektro Terapan 2.3 (2014).
Nurhadi, Ahmad Adhitya, Denny Darlis, and Muhammad Ary Murti. "Implementasi modul komunikasi LoRa RFM95W pada sistem pemantauan listrik 3 fasa berbasis IoT." Ultima Computing: Jurnal Sistem Komputer 13.1 (2021): 17-21