RANCANG BANGUN DAN PENGUJIAN MESIN PENYANGRAI KACANG TANAH KAPASITAS 10 KG/PROSES
https://doi.org/10.58466/injection.v3i1.1495
Keywords:
Design, Roast, Ground nut, Capacity, Economic AnalysisAbstract
Currently, the process of roasting peanuts in the North Tapanuli Regency area is still done manually. This will result in fatigue for the operator. To improve this condition, a roasting machine is needed to facilitate the roasting process. The peanut roaster machine that was designed in this study has a roasting tube as the main component with an electric motor as the prime mover. In addition there is a shaft, gearbox stirrer and clutch. The results of this design obtained power of prime mover and tube rotation of 1/2 hp and 28 rpm. The machine use a ceramic gas stove as heater. The experimental results show the machine can operate properly. The time needed to roast 10 kg of peanuts is 1 hour. BEP units obtained as much as 810 kg. The maintenance is carried out by cleaning and providing lubricant especially on the gearbox.
References
T. Samosir, O. M., Marpaung R. G., dan Laia, “Respon Kacang Tanah (Arachis hypogea L) terhadap pemberian unsur mikro.,” Agrotekda, vol. 3, no. 2, pp. 64–83, 2019.
Sainindonesia, “https://www.sainsindonesia.id/2021/12/07/dongkrak-produksi-kacang-tanah-balitbangtan-kembangkan-teknologi-bukasin/, Akses 16 September 2022.,” 2022.
Disepertan, “https://dispertan.bantenprov.go.id/lama/read/artikel/1132/Hypoma-3-VUB-Kacang-Tanah-Tahan-Penyakit-Karat-dan-Bercak-Daun.html. Akses 16 September 2022.,” 2022.
Ahligizi, “https://ahligizi.id/blog/2019/05/01/tabel-komposisi-pangan-indonesia-tkpi-terbaru/Akses 16 September 2022.,” 2022.
T. S. dan P. W. Y. Ariyanti, S. Soekardi, C., Suhada, “Rancang Bangun Mesin Penyangrai Kacang Tanah pada Industri Mocha di Sukabumi,” J. Energi dan Manufaktur, vol. 10, no. 2, pp. 53–59, 2017.
A. I. Chikelu, U.U., Ude, M.U., Onyekwere D.C., Ekwereike, G.C., Okpanachi, “Design of Goundnut Kernel Roastmaster,” Int. Res. J. Egineering Technol., vol. 2, no. 7, pp. 17–24, 2015.
S. A. Ogujirin, O.A., Odeiyi, O.M., Olubo, A.S., Farounbi, A. J. Ola, O.A., dan Adele, “Design and Construction of an Electrically Powered Coffee Roasting Machine,” in IOP Conference Series, Earth and Environtmental Science, 2020, p. 012009.
K. Sularso dan Suga, Dasar Perencanaan dan Pemilihan Elemen Mesin. Jakarta: Pradnya Paramita., 2008.
L. H. Thoriq, A., Sugadi W. K., Yusuf, A., dan Imaduddin, “Modifikasi Mesin Roasting Biji Kopi Merek William Edison Tipe W600I (Studi kasus pada Java Sumedang Coffee, Kabupaten Sumedang, Jawa Barat).,” J. Tek. Pertan. Lampung., vol. 9, no. 4, pp. 276–278, 2020.
M. Kusumardani A. dan Alamsyah, “Analisis Menghitung BEP (Break Event Point) dan Margin of Safety dalam Menentukan Harga Jual pada Usaha Kecil Menengah.,” J. Ilmu Keuang. dan Perbank., vol. 9, no. 2, 2020.
