ANALISIS FOTOMETRI OBJEK API MENGGUNAKAN SOFTWARE IMAGEJ
https://doi.org/10.58466/injection.v2i1.1454
Keywords:
Flame, Dimension, Color, ImageJAbstract
Flame is a phenomenon of rapid oxidation of an element in a physical and chemical reaction process that produces heat, light, and other chemical products. Flame testing aims to quantify the presence of a particular element through the emission spectrum of each element. In addition, the physical characteristics of the fire object were also observed. ImageJ software is one of the practical supporting applications that is often used for observing flame objects specifically in the fields of chemistry, physics, and energy. Experimental results have shown the level of accuracy of object dimensions and spectrometry with an accuracy rate of 97%. Differences in measurement ranges are often triggered by the image of the object and the foresight of the researcher.
References
D. Perdana and E. Gunawan, “Perilaku Dan Kestabilan Nyala Api Pada Pembakaran Premixed Minyak Biji Kapas Terhadap Variasi Air Fuel Ratio,” in Prosiding Nasional Rekayasa Teknologi Industri dan Informasi XIII, 2018, p. 239~246.
L. Qiao, Y. Gan, T. Nishiie, W. J. A. Dahm, and E. S. Oran, “Extinction of premixed methane/air flames in microgravity by diluents: Effects of radiation and Lewis number,” Combust. Flame, vol. 157, no. 8, pp. 1446–1455, 2010, doi: 10.1016/j.combustflame.2010.04.004.
J. Min, F. Baillot, H. Guo, E. Domingues, M. Talbaut, and B. Patte-Rouland, “Impact of CO2, N2 or Ar diluted in air on the length and lifting behavior of a laminar diffusion flame,” in Proceedings of the Combustion Institute, 2011, vol. 33, no. 1, pp. 1071–1078, doi: 10.1016/j.proci.2010.06.100.
M. Matalon, “Intrinsic flame instabilities in premixed and nonpremixed combustion,” Annu. Rev. Fluid Mech., vol. 39, no. December 2006, pp. 163–191, 2007, doi: 10.1146/annurev.fluid.38.050304.092153.
J. Ray, H. N. Najm, R. B. Milne, K. D. Devine, and S. Kempka, “Triple flame structure and dynamics at the stabilization point of an unsteady lifted jet diffusion flame,” in Proceedings of the Combustion Institute, 2000, vol. 28, no. 1, pp. 219–226, doi: 10.1016/S0082-0784(00)80214-3.
J. Buckmaster et al., “Combustion theory and modeling,” in Proceedings of the Combustion Institute, 2005, vol. 30, no. 1, pp. 1–19, doi: 10.1016/j.proci.2004.08.280.
G. Soebiyakto, D. U. Effendy, U. W. Malang, K. Malang, U. W. Malang, and K. Malang, “Studi Simulasi Karakteristik Nyala Api Pembakaran Difusi,” in Conference on Innovation and Application of Science and Technology (CIASTECH 2020), 2020, pp. 453–460.
A. Ainurrofiq and I. Qiram, “Study of Physical Characteristics and Flame of Bamboo Leaf Brickets Studi Karakteristik Fisik Dan Nyala Api Briket Daun,” Indones. J. Mech. Eng. Vocat., vol. 1, no. 2, pp. 89–94, 2020.
S. P. Burke and T. E. W. Schumann, Diffusion flames (Chapter 6). Academic Press, 2008.
Imanuel, “Kajian Experimental Fenomena Reattachment Flame Sebagai Dasar Pencegahan Flashback Flame Pada Bunsen Burner Dengan Bahan Bakar,” Universitas Indonesia, 2012.
Fawzy El-Mahallawy, "Fundamentals And Technology Of Combustion". Elsevier, 2022.
Yonathan, “Pengaruh Variasi Temperatur Bahan Bakar Gas Lpg Campuran Terhadap Karakteristik Nyala Api Difusi Pada Burner Gas Tipe ‘Ejected Combustor,’” Skripsi, p. 80, 2008.
A. S. Auzani and I. M. K. Dhiputra, “Analisis Pengaruh Variasi Medan Magnet Terhadap Karakteristik Api Difusi Bahan Bakar LPG,” in Proceeding Seminar Nasional Tahunan Teknik Mesin XIII (SNTTM XIII), 2014, pp. 70–72.
I. W. Suarsa, SPEKTROSKOPI. Denpasar, Indonesia: UNIVERSITAS UDAYANA, 2015.
K. A. Khairun Athiya, Sunardi, “Potassium and Sodium Content Ration in Sambung Nyawa Leaf (Gynura Procumbens (Lour.) Merr.) Based on Age and Way of Processing,” Sains dan Terap. Kim., vol. 10, no. 2, pp. 91–100, 2016.
H. T. Chu and S. E. Taylor, “An Experimental Demonstration of a Multi-element Flame Photometer: Determination of Salt Concentration in Soy Sauce,” Int. J. Chem., vol. 8, no. 1, p. 25, 2015, doi: 10.5539/ijc.v8n1p25.
M. N. Kustanto, “Karakteristik Kecepatan Nyala dan Konsentrasi Ion pada Pembakaran Premixed Butana,” J. Rotor, vol. 5, no. 3, pp. 28–31, 2017.
E. D. Handoyo, “Perancangan Mini Image Editor Versi 1 . 0 sebagai Aplikasi Penunjang Mata Kuliah Digital Image Processing,” J. Inform., vol. 2, no. 2, pp. 145–154, 2006.
v Sasongko, Mega Nur, “Proceeding Seminar Nasional Tahunan Teknik Mesin XIV (SNTTM XIV) Karakteristik Api Premiks Biogas pada Counterflow Burner,” in Proceeding Seminar Nasional Tahunan Teknik Mesin XIV (SNTTM XIV), 2015, pp. 1–6.
A. Putra, “Cara Menggunakan Software ImageJ,” 2017. http://alfiyansaputra.blogspot.com/2017/05/cara-menggunakan-software-imagej.html (accessed Mar. 22, 2022).
L. Reinking, “Examples of Image Analysis Using ImageJ.” Department of Biology, Millersville University, Millersville, 2007.
T. D. Novianto, “Mengenal Software Pengolahan Gambar ImageJ,” Indonesian Research Institute for Fisheries Postharvest Mechanization, 2017. http://www.mekanisasikp.web.id/2019/12/mengenal-software-pengolahan-gambar.html (accessed Aug. 22, 2022).
M. Firmansyah, I. Qiram, and G. Rubiono, “Pengaruh Variasi Kekasaran Lubang Nozzle Dengan Campuran Bahan Bakar Pertalite dan Spiritus Terhadap Karakteristik Nyala Api,” J. V-Mac, vol. 6, no. 2, pp. 57–60, 2021.
R. R. V. Sona, S. Soetadi, and S. Kawano, “Studi Eksperimen Distribusi Temperatur Nyala Api Kompor Bioetanol Tipe Side Burner dengan Variasi Diameter Firewall,” J. Tek. ITS, vol. 1, no. Sept, 2012, pp. 20–24, 2012, [Online]. Available: http://www.ejurnal.its.ac.id/index.php/teknik/article/view/415/314.
U. Faruk, “Analisis Pengaruh Aliran Turbulen Terhadap Karakteristik Lapisan Batas pada Pelat Datar Panas,” vol. 1, no. 1, pp. 57–60, 2012.
S. E. W. Neng Nenden Mulyaningsih, Fita Widiyatun, “Rekomendasi teknik analisis citra SEM dengan menggunnakan free software ImageJ,” Wahana Fis., vol. 5, no. 2, pp. 104–112, 2020.
